Bakers Waste Equipment, Inc Transfer Station Compactor


Pinnacle transfer station compactors are built for high volume waste streams packing directly into a transfer trailer. Available in 12-yard to 15-yard capacities. Hydraulic trailer hook up, platforms, and load chutes are optional and available upon request. Built to specifications to accommodate a new or existing site. Pinnacle Support Team provides turn-key service with site analysis, recommended specifications, old equipment removal, new equipment delivery/installation, and training.


General compactor Specifications:

  • Dimensions – 317” overall length x 94” overall width x 77” overall height
  • Clear top dimension – 106” x 80”
  • Discharge – 80” wide x 60” high
  • Ram Face – 80” wide x 48” high
  • Ram Penetration – 30”

Performance Specifications:

  • Ram Force – 142,000 lbs Normal / 230,000 Max Boost
  • Ram Cylinders – (2) 7” bore x 5” rod cylinders x 141 ” stroke
  • Ram Cycle Time – 32 seconds

Hydraulic Specifications:

  • System Pressures – 1850 psi Normal / 3000 psi Max Boost
  • Pump Capacity – 156 gpm multi stage (68/54/34)
  • Reservoir Capacity – 350 gallons
  • 5HP Cooling System w/Kidney Loop

Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger

Electrical Specifications:

  • UL listed panel box (NEMA 3R or higher)
  • Operation Voltage – TBD, 3ph
  • Control Voltage – 120V . 24 VDC
  • Motor – 60 HP, Tri-volt motor, 3 ph
  • Power Unit Operating System – Koyo Click PLC
  • Standard Controls on remote pendant control and power unit
  • Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light

General compactor Specifications:

  • Dimensions – 354” overall length x 94” overall width x 85” overall height
  • Clear top dimension – 126” x 80”
  • Discharge – 82” wide x 62” high
  • Ram Penetration – 39”

Performance Specifications:

  • Ram Force – 142,000 lbs Normal / 230,000 Max Boost
  • Ram Cylinders – (2) 7” bore x 5” rod cylinders x 165 ” long
  • Ram Cycle Time – 35 seconds

Hydraulic Specifications:

  • System Pressures – 1850 psi Normal / 3000 psi Max Boost
  • Pump Capacity – 156 gpm multi stage (68/54/34) w/ Regen Hydraulics
  • Reservoir Capacity – 350 gallons
  • 5HP Cooling System w/Kidney Loop

Reservoir capacity – 350gal with internal baffles to provide cooling capability without the use of a separate circulation pump and heat exchanger

Electrical Specifications:

  • UL listed panel box (NEMA 3R or higher)
  • Operation Voltage – TBD, 3ph
  • Control Voltage – 120V . 24 VDC
  • Motor – 60 HP, Tri-volt motor, 3 phase
  • Power Unit Operating System – Koyo Click PLC
  • Standard Controls on remote pendant control and power unit
  • Standard Controls include key start switch, red mushroom E-stop button, reverse button, 80% full warning light

All material on this page referring to Bakers Waste Equipment, Inc Transfer Station Compactor including text, images, logos and pdfs, are owned by Bakers Waste Equipment, either through copyright or trademark, unless otherwise indicated.

Municipal Equipment, Inc. is an authorized Bakers Waste Equipment reseller.