Pac-Mac® RLM Series Refuse Truck

The RLM Series is Pac-Mac’s medium size rear loader. This unit is available in 11, 13, 16 cubic yards with a compaction rate of 800-900 lbs/yd. Our rear loader truck is engineered using the most advanced computer modeling systems, proving that Pac-Mac is committed to providing the highest quality products in the solid waste industry.

  • One piece flat floor
  • Curved shell body
  • Fast cycle time
  • Meets or exceeds ANSI standards
  • Wide open accessibility for cleaning and maintenance
  • Automatic latches and integrated tailgate props
  • The industry’s highest standard for hydraulic cleanliness
  • LED lighting, weatherproof connections and braided loom
  • Dual Amber oval rear strobes
  • Heat-treated pins and replaceable bushings throughout
  • Large access door with safety interlock
  • Emergency stop on curb side
  • Driver alert buttons on both sides
  • Sectional valves
  • Single or dual cart tippers
  • Reeving system: 15K cylinder
  • Kick bar and container latches (38” minimum chassis height only)
  • Front-mounted pump
  • Amber or clear beacon rear strobes (single or dual)
  • Amber oval flush mount strobes (front and/or rear)
  • Smart light strobe system (may be combined with amber ovals)
  • Rear vision camera
  • Work lights over hopper and tailgate sides
  • Frame mounted water cooler
  • Frame mounted tool box
  • Tool holder
  • Emergency stop on street side
  • Pressure gauge
  • Limb guard

Model

Capacity

  • 11 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,187 lb

Body Weight (Complete Unit)

  • 10,320 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 1/4″ 100 ksi T-1

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);

    10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

Model

Capacity

  • 13 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,396 lb

Body Weight (Complete Unit)

  • 10,530 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 3/16″ 100 ksi T-1 (1/4″ T-1 option)

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

Model

Capacity

  • 16 yd3

Hopper Capacity

  • 2.6 yd3

Body Weight (Body Shell Only)

  • 3,709 lb

Body Weight (Complete Unit)

  • 10,850 lb

Hopper Inside Width

  • 80″

Body Construction Specifications

Sidewalls (curved shell)

  • 11 ga high tensile steel

Floor (single sheet, flat)

  • 3/16″ high tensile steel

Roof (curved shell)

  • 11 ga high tensile steel

Ejection Panel Face

  • 11 ga high tensile steel

Hopper

  • 3/16″ 100 ksi T-1 (1/4″ T-1 option)

Packer Panel Face

  • 3/16″ 100,000 PSI (T-1)

Slide Panel Face

  • 3/16″ high tensile steel

Hopper Sides

  • 3/16″ T-1 steel (lower tailgate);10 ga high tensile steel (upper tailgate)

Hydraulic System

Cylinder

  • Ejector: (1) Multi-stage 5.5″ bore
  • Tailgate: (2) 3″ bore; 1.75″ rod; 30.5″ stroke
  • Slide: (2) 4.5″ bore; 3.5″ rod; 27″ stroke
  • Packer: (2) 4.5″ bore; 3.5″ rod; 27″ stroke

Valves

  • Shutoff: Ball
  • Packing Controls: Sectional Spool
  • Ejector/Tailgate Raise: Sectional Spool

Operating Pressure in PSI

  • 2,200

Maximum Operating Pressure

  • 2,400

Gallons Per Minute (GPM)

  • 35-38 GPM

Reservoir

  • 50 gal.

Packing Cycle Time

  • Complete: 17-19 sec
  • Reload 3 sec

Compaction Rate in Lbs./Yard

  • 800-900

All material on this page referring to Pac-Mac® RLM Series Refuse Truck including text, images, logos and pdfs, are owned by Pac-Mac, either through copyright or trademark, unless otherwise indicated.

Municipal Equipment, Inc. is an authorized Pac-Mac reseller.