Galbreath Heavy Duty Roll-Off Pup Trailer (TT)


Texas Tongue (TT) roll‐off cable hoist trailers are ideal for transporting two container loads safely and effectively. These trailers allow users to haul loads with or without roll-off ready trucks. The TT is specifically designed to work integrally with Galbreath’s pintle ready aprons, which allow for jack-knifing the trailer for over-the-tongue dumping without having to disconnect.

Ideal for transporting two container loads safely and effectively with the ability to unload the trailer load without unhooking from the tow vehicle.


  • A36 Steel – Milled I-Beam Trailer Frame
  • A36 Steel – Formed Channel Cross Members
  • Jackknife capable – Fabricated T-1 Steel and 10″ I-Beam w/ 3″ Bolt On Pintle Lunette
  • Structural tubing A500 Grade C Hoist Main Frames
  • 2 ½” Rear Pivot – Solid Steel
  • 7-Gauge manufactured channel w/ recessed & sealed LED Lighting in bumper
  • 50,000 lb.  Two Speed Twin Leg Landing Gear
  • 50,000 lb.  Hutch Single Point Suspension w/ 25k lb. Oil Filled Axles
  • 10-Hole Hub Piloted Steel Rims w/ 11R/22.5 Tires – 16 Ply & Wheel Check Indicators
  • Automatic spring loaded (pass through type) – not included on TM-models
  • Front stops are 1 ½” Steel Plates, Cupped for Std. 4″ Roller & (Moveable Stop Blocks on TM-models)
  • (2) sets of Nylon Ratchet Hold Downs – 2-front & 2 rear
  • Side rollers are 4″ O.D. with bronze bushings (not available on TM-models)
  • 7/8″ – 6 x 37 EXIWRC Domestic Cable
  • Swivel Eye on OR,EX models (w/ latch – IO model); Knuckle on HH model; Master Hook on TM model
  • (4) cable clamps
  • 10″ O.D. cable sheaves with grease grooved bronze bushings
  • (2) – 6″ Dual acting rod type lift cylinders
  • (2) – 6″ Dual acting rod type winch cylinders
  • 2 spool control valve / 45 GPM w/ safety bypass
  • Hoses have Quick Disconnects – 1″ female (pressure line) & 1 1/4″ male (return line) – 3,000 psi minimum rating
  • Hydraulic System Requires – 1,850 psi (2,500 psi max.) with 37.5 GPM flow rating
  • Hydraulic Tank Requires – 50 gallon capacity tank or 80 gallon tank when used with roll off hoist truck
  • Pioneer Tarping Systems
  • Lift Axles, Rims and Tires
  • Spare Tire Carriers (Side or Underbody)
  • Auxillary Stops (Fold over the cylinder; Fold down in-frame; Over the roller)
  • Auxillary Hold Downs
  • Fenders
  • Toolboxes
  • Scale Systems
  • Hydraulic landing gear
  • Telescopic lift cylinders
  • Adjustable Pintle Eye Mounting Plate
  • Outboard Supported Side Rollers
  • T-1 Steel Wear Strips (standard on extendible tail models)
  • Four Wire Hoses and Hose Protection Sleeves
  • Side Mounted Skid Plates (Rear Wing or Full Length)
  • LED Work Lights
Model Description
TT-OR-176 PUP TRAILER – LIVE HYDRAULICS–40k lb. GVWR – Outside Rail 35 1/2″ – 18′-22′ Containers
TT-IO-176 PUP TRAILER – LIVE HYDRAULICS–40k lb. GVWR – Inside/Outside Rail 35 1/2″ – 18′-22′ Containers
TT-HH-176 PUP TRAILER – LIVE HYDRAULICS–40k lb. GVWR – Deadlift, Narrow Outside Rail 35″ – 18′-20′ Containers
TT-EX-176 PUP TRAILER – LIVE HYDRAULICS–40k lb. GVWR – Outside Rail/Ext. Tail (80″) – 18′-20′ Containers
TT-TM-176 PUP TRAILER – LIVE HYDRAULICS–40k lb. GVWR – Trough Mount – 18′-22′ Containers

All material on this page referring to Galbreath Heavy Duty Roll-Off Pup Trailer (TT) including text, images, logos and pdfs, are owned by Galbreath, either through copyright or trademark, unless otherwise indicated.

Municipal Equipment, Inc. is an authorized Galbreath reseller.